Newshades Pressure Washing Service, LLC

🧴 Pool Chemical Application Steps

1. Clean the pool. Remove large debris, brush all pool surfaces, and vacuum the floor.
2. Add the correct dose of **Leslie's Winter Stain Away** with the pump running on high speed.
3. **Balance the water** to the recommended ranges. (Wait at least **1-2 hours** between chemical applications.)
4. Add the correct dose of **Leslie's Winterizer** to the pool with the pump still running. (**Wait 1 hour**).
5. Broadcast **Leslie's Fresh 'N Clear** (1 lb per 10,000 gallons) across the surface with the pump running. (**Wait 30 minutes**).
6. Bring Free Available Chlorine (FAC) level to **2.0–4.0 ppm** if not there already. Broadcast **Leslie's Chlor Brite** (sold separately) evenly over the deep end.
7. Keep the pump running for at least **8 hours** to dispense chemicals throughout the pool.
8. Add an **AquaPill WinterPill** (sold separately). (Do NOT add if chlorine levels are above the recommended range).
9. Place the **Winter Sorb™** oil-absorbing sponge in the pool.
10. Add the **time-release Chemical Floater** to the water. Punch through all indents up to your pool size. **DO NOT THROW FLOATER INTO POOL!**